Expert Answers about Starcraft Launch Ultra Lite Travel Trailer

• Cover Recommendation for 2016 Starcraft 21FBS Ulta-Lite TT
• I checked out the length of your 2016 Starcraft 21FBS Ulta-Lite TT and found that it's 23-1/2 feet in length which will work perfectly with the Adco RV Cover for Travel Trailers # AD67ZR which is designed for travel trailers between 22 and 24 feet. The height dimension will fit too. The way the RV cover heights are measured do not include the wheels or any roof accessories so yours would work well with this.
  view full answer...


• Replacement Scissor Jacks for Starcraft Launch Ultra Lite
• We have great stabilizer jacks sold in pairs that would work great on your 2015 Starcraft Lanch Ultra Lite with the part # e99012. These have a weight capacity of 5,000 lbs and a lift height of 24 inches.
  view full answer...


• Can 600/6000 Fastway e2 Weight Distribution System be Upgraded to 800/8000
• Yes, the same head unit, part # FA92-02-1255, is used for your current 6K Fastway e2 Weight Distribution # FA92-00-0600 and the 8K version # FA92-00-0800. All you need to do is swap out your current trunnion bars with the Replacement Trunnion Bars # FA92-01-0899 to have the 8K system. Please note that the tongue weight rating of a weight distribution system includes both the loaded tongue weight of the trailer as well as the weight of any cargo that sits behind the rear axle of the tow...
  view full answer...


• Solution for Needing Replacement Switches for Lippert Electric Jack part # LC285318
• Hey Mike, so the only way to get the two replacement switches you are in need of for the Lippert jack part # LC285318 is with the replacement lid that includes the switches which is part # LC285160.
  view full answer...


• Replacement Vent Cover for 2018 Starcraft Launch Hybrid Camper
• I have a solution for you, but there isn't a way for us to know which vent cover will work on a particular camper in most cases. Most standard roof vents will measure 14" x 14" inside/ 14-1/2" x 14-1/2" outside, so it's fairly likely that you've got one of these. The easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. For example, if there is a rolled metal hinge attached...
  view full answer...